PET bottles that will enter the recycling system are separated from foreign materials, PVC by hand in the sorting conveyor.
At this stage, the color separation of the bottles is also made.
The loading conveyor regularly feeds PET bottles into the crushing machine.
Crushing machine, PET material to be recycled, part size 10 - 12 mm. shrinks to be.
Pre-washing of dirty bottles in the crushing machine is provided by spraying water from the upper chamber with PET bottles to the Crushing Machine.
PET material is carried with the spiral screw geometry elevator located under the crushing machine.
The crushing outlet elevator carries the PET burrs to the Cover Label Separation Pool.
In this pool, the covers and labels are advanced with rotating pallets on the water surface and taken from the pool with the spiral placed at the top of the pool exit.
In the next stage; The elevator located at the bottom not only mixes the PET burrs, but also separates the lids and labels inside the water (it comes to the surface) and carries the material to the exit of the pool.
A second elevator at the exit of the pool brings the burrs out of the pool.
The separator at the bottom of the pool separates the water and dirt on the PET burrs and transports the material to the Chemical Washing Machine.
In the Chemical Washing Machine, PET burrs are washed with water and chemicals at temperatures above 90 degrees.
This process cleans both the dirt on the material and the glue residue used to stick the labels.
PET bottles that will enter the recycling system are separated from foreign materials, PVC by hand in the sorting conveyor. At this stage, the color separation of the bottles is also made.